BARTEC PEF consists of a combination of polyester faced acoustic foam bonded to a flexible mass barrier with a further acoustic foam decoupler bonded to the other side of the mass barrier.
By bonding the thinner decoupling layer (generally 6-12mm thick) to the surface of the structure it allows the mass barrier to act indepentently to the surface which adds significantly to the overall transmission loss of the structure.
BARTEC FLEF consists of a combination similar to PEF above but the polyester facing is replaced by a PV film facing. Other combinations are available upon request. The selection of the correct materials and facing type and also the thickness is based upon the reductions required and the frequency spectrum of the noise being contained.
TYPICAL APPLICATIONS
 |
|
High performance equipment enclosures
Trucks and buses
Tractors and construction equipment
Wood chippers | |
|
ADDITIONAL INFORMATION
|
| MATERIAL |
GRADE |
TEXTILE STRENGTH |
BLWD RESISTANCE |
FLAMMIBILITY |
| TEST |
RESULTS |
| FOAM |
28-30kg/m2 |
100kpa(min) |
N/A |
UL94HF1/MVSS302 |
Self ext. |
| BARRIER |
4kg/m2 |
8.5kgf/cm2 |
No crack 50mm mandrel |
MVSS302 |
Self ext. |
| THICKNESS |
ROLL WIDTH |
ROLL LENGTH |
FILM FACING AVAILABLE |
25
32
Custom order |
1400
1400
|
10m
10m
|
Metalised
Polyester
|
Duraskin
PU
|
Plain
|
Specifications are subject to change without notice. The information presented on this Data Sheet represents "Typical" Test results and is furnished by Entron to its customers for their guidance only. It is the customer's responsibility to assess the suitability and serviceability of the product for their particular application. | |
| |
|
CONTACT
|
David Sanders - Manager Sound Suppression Solar Systems Filtration Solutions Water Treatment 521 Dowling St., Wendouree Ballarat, 3350, Victoria david@smartoptions.com.auMobile: 0419 108 844 Phone: (03) 5339 2329
|
|
|
|
Copyright © 2005 Smart Options. Designed by PBSA POS.